Snails? - Betta Fish and Betta Fish Care
Reply
 
LinkBack Thread Tools
post #1 of 13 (permalink) Old 06-07-2010, 08:31 AM Thread Starter
New Member
 
Join Date: Jun 2010
Posts: 16
Snails?

I just got my first betta, he's being set up in a five gallon tank with a whisper ten filter and hopefully a hydor heater. I would lika to add a snail, as well. They'd be the only two tank mates.

What type of snail would be best? Also, how big would it have to be so as not to attract agressive behavior from Federigo, who's on the small side?
Kitty88 is offline  
Sponsored Links
Advertisement
 
post #2 of 13 (permalink) Old 06-07-2010, 08:34 AM
Member
 
Welsh's Avatar
 
Join Date: Apr 2010
Location: South Wales, UK
Posts: 1,391
An apple snail maybe?

___________
Leah
Welsh is offline  
post #3 of 13 (permalink) Old 06-07-2010, 08:55 AM Thread Starter
New Member
 
Join Date: Jun 2010
Posts: 16
Thanks, I was researching this separately and decided on an apple too. My tank isn't exactly established though and I can't cycle it before putting him in. Should I hold off on the snail until the tank has settled, or will it be ok?
Kitty88 is offline  
post #4 of 13 (permalink) Old 06-07-2010, 08:57 AM
Member
 
vaygirl's Avatar
 
Join Date: Sep 2009
Location: Middlesex County, NJ
Posts: 2,649
I'd hold off until it's cycled. Snails poo SO much, it would be better if you established the tank first to deal with the poo!

16 Gallon-4 Corys, 3 Endler's, 5 Celestial Pearl Danios
10 Gallon: Male King Betta-Kilo
5 Gallon: Male Marble HM-Logan
5 Gallon: Dwarf Puffer-Huey
5 Gallon: Male VT-Tango
vaygirl is offline  
post #5 of 13 (permalink) Old 06-07-2010, 09:05 AM Thread Starter
New Member
 
Join Date: Jun 2010
Posts: 16
Ok, cool. And once it's cycled the filter will be able to handle all the poo? Also, federigo is in his 'cup' until the filter and heater are set up. How long should I run it before putting him in? (wasn't my idea to get him without a tank set up first)
Kitty88 is offline  
post #6 of 13 (permalink) Old 06-07-2010, 09:21 AM
Member
 
vaygirl's Avatar
 
Join Date: Sep 2009
Location: Middlesex County, NJ
Posts: 2,649
I usually do mine on the same day, once the temp is where I want it in the tank. Sometimes that takes longer if you used cold water to fill it. I cut corners and use lukewarm water. Well, not really warm but not ice cold either, if you know what I mean?

Once your temp is where you want it, just make sure you acclimate him to the water. Float his cup in the tank and slowly replace the cup water with tank water until it's all tank water in the cup. Cup water removed goes in a seperate bowl to be discarded, not into the new tank. Then he can go in. I usually do 1/4 water replacement maybe every 10 minutes? So it's about a 40 minute process.

16 Gallon-4 Corys, 3 Endler's, 5 Celestial Pearl Danios
10 Gallon: Male King Betta-Kilo
5 Gallon: Male Marble HM-Logan
5 Gallon: Dwarf Puffer-Huey
5 Gallon: Male VT-Tango
vaygirl is offline  
post #7 of 13 (permalink) Old 06-07-2010, 09:27 AM Thread Starter
New Member
 
Join Date: Jun 2010
Posts: 16
Quote:
Originally Posted by vaygirl View Post
I usually do mine on the same day, once the temp is where I want it in the tank. Sometimes that takes longer if you used cold water to fill it. I cut corners and use lukewarm water. Well, not really warm but not ice cold either, if you know what I mean?

Once your temp is where you want it, just make sure you acclimate him to the water. Float his cup in the tank and slowly replace the cup water with tank water until it's all tank water in the cup. Cup water removed goes in a seperate bowl to be discarded, not into the new tank. Then he can go in. I usually do 1/4 water replacement maybe every 10 minutes? So it's about a 40 minute process.
Actually (this is probably a newb mistake) I filled his tank a day ago when I got it, because I thought the water had to age. So his tank has been filled, and when I get the filter and heater today (finally!) I'm going to put the rest of his decorations in and get the filter and heater going. I heard heaters can fluctuate until they stabilize and that new filters need to be ran before introducing fish, which is why I was going to wait, but the sooner he's in the five gallon, the better. He looks so bored in that stupid little tank....
I was also going to get him some brine shrimp, but he hasn't really been eating much. I'd say he ate maybe two pellets yesterday, and only one so far today. Will the shrimp encourage him to eat, or is two or three pellets a day normal?
Kitty88 is offline  
post #8 of 13 (permalink) Old 06-07-2010, 10:10 AM
Member
 
Welsh's Avatar
 
Join Date: Apr 2010
Location: South Wales, UK
Posts: 1,391
It is recommended that you cycle a tank first but if your betta is in a cup then I would put him straight in, just make sure you do a 25% or 50% twice weekly =)

___________
Leah
Welsh is offline  
post #9 of 13 (permalink) Old 06-07-2010, 10:26 AM Thread Starter
New Member
 
Join Date: Jun 2010
Posts: 16
Quote:
Originally Posted by Welsh View Post
It is recommended that you cycle a tank first but if your betta is in a cup then I would put him straight in, just make sure you do a 25% or 50% twice weekly =)
Oh, good! And the 25% to 50% water changes will still allow cycling to happen? I'm not too clear on the whole cycling thing. I'd love for him to be in the tank soon though, I feel bad everytime I see him in his little tank. It's actually 3/4 of a gallon, but it's still a bajillion times too small.
Kitty88 is offline  
post #10 of 13 (permalink) Old 06-07-2010, 10:29 AM
Member
 
Welsh's Avatar
 
Join Date: Apr 2010
Location: South Wales, UK
Posts: 1,391
As long as you dont do a 100% then your cycle will be fine =)

___________
Leah
Welsh is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Betta Fish and Betta Fish Care forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
Powered by vBadvanced CMPS v3.2.3
For the best viewing experience please update your browser to Google Chrome