By popular demand: How to ship a fish. - Betta Fish and Betta Fish Care
LinkBack Thread Tools
post #1 of 15 (permalink) Old 06-01-2010, 06:08 PM Thread Starter
1fish2fish's Avatar
Join Date: Sep 2009
Location: Savannah, GA
Posts: 5,904
By popular demand: How to ship a fish.

I've seen this question a lot, especially in the Betta Adoption Thread so I thought I would oblige :)

*There are alternate methods but this is how I do it and what I find is most popular*

Shipping a fish:

The Box
First you will need a box. Preferably one that is "cube" shaped and not flat.

Next you will need styrofoam insulation. About 1/2 inch thick. This can be bought at your local home improvement store. **NOTE: you can also use bubble wrap, news paper, and packing peanuts. The styrofoam is much stronger, however and safer.**

What ever packing you use make sure you have enough to cover all sides, top, and bottom of the box. So the fish is essentially "wrapped" in packing and never actually touches the box itself.

The styrofoam you will cut so it fits snugly in the box like so..

**if you use some other form of packing, place a layer of what ever it is on the bottom first, then add the fish, then pack around the sides**

Bagging the fish
You will need to order plastic shipping bags. THIS IS A MUST! Sites like ebay, aquabid, or are good sources to get them from.

First, fill the bag with FRESH, dechlorinated water. DO NOT use water that the fish has already been in. He is going to need the cleanest water possible. Fill it about 2 inches or so (you can add more later if you feel its needed). When it comes to bettas, the amount of water is not what your looking for, its the amount of AIR.

Next, Net your fish and carefully place him into the water (Alexander will be my model for this thread ).

After that grab the bag from the top so it is "fat" with air. DO NOT BLOW AIR INTO THE BAG! In case you missed that science class, the air you blow from your mouth is carbon dioxide gas... not oxygen. After you have air in the bag twist the top really tight and knot it.. the way you would do a balloon. It can take several tries but keep trying.

Grab the bag..

Twist and knot..

Make sure that there is enough water in the bag so that if it is turned sideways the fish is still under water.

Next invert the bag (turn it upside down) and place it into another bag. Knot it just like you did the first bag. This is to help prevent any damage.

Next place the fish in the box. If there is enough room put the fish on its side. I've mailed fish placed up and on the side and I don't really think there is much of a difference.

After that you need to fill the empty spaces with packing material. Peanuts, newspaper, bubble wrap all work well. I've also used grocery bags (shown here) and old class notes for packing. Its a great way to recycle.

Cover the top of the fish with packing material and if your using styrofoam inserts put the top of that on.

After that tape up the box. Using a sharpie or labels printed on your computer write stuff like "FRAGILE", "THIS SIDE UP", "PERISHABLE", and "AVOID EXTREME TEMPERATURES".

Avoid writing "live fish" on the box because a caring postal worker, meaning well, might put the fish next to a heater or air conditioning. After that your fish is ready to go to his new owner

If other posters have different shipping methods or if you have questions please feel free to comment. Happy shipping!

*Be smart.. Do your research!!*[/COLOR][/FONT]

1fish2fish is offline  
Sponsored Links
post #2 of 15 (permalink) Old 06-02-2010, 11:09 AM
Join Date: Sep 2009
Posts: 3,477
Thank you for making this thread! I've always wondered how you guys do it. :) Great info!

BettaxFishxCrazy is offline  
post #3 of 15 (permalink) Old 06-02-2010, 11:35 AM
truthequalslies's Avatar
Join Date: Jan 2010
Location: california
Posts: 334
Awsome :) also I've. Been told not to make the bag too airtight (so that you can still squish it a. Lil) a bag to airtight can harm ur bettas labirinth organ (how he breathes) because of how presurized an airtight bag is (imagine ur ears popping as you go up into the mountans)

just keep swimming just keep swimming =^-^= >D
clicky my eggy pleeease
truthequalslies is offline  
post #4 of 15 (permalink) Old 06-02-2010, 12:08 PM
bloo97's Avatar
Join Date: Mar 2010
Location: Georgia
Posts: 2,320
Awesome! Very helpful!

"Do your duty in all things. You cannot do more, you should never wish to do less."
~Robert E. Lee
bloo97 is offline  
post #5 of 15 (permalink) Old 06-02-2010, 12:35 PM
Jayy's Avatar
Join Date: Dec 2009
Location: Palm bay, FL
Posts: 1,932
Thanks!!! I don't plan on shipping fish, but this is very helpful.

55 gallon planted tank, starting over!!!( looking crappy, needs a major rescape)
Jayy is offline  
post #6 of 15 (permalink) Old 06-02-2010, 05:15 PM Thread Starter
1fish2fish's Avatar
Join Date: Sep 2009
Location: Savannah, GA
Posts: 5,904
All the fish I've ever shipped have been bagged airtight as well as every fish I saw bagged for the show. I've never heard of the pressure being bad for the fish.

*Be smart.. Do your research!!*[/COLOR][/FONT]

1fish2fish is offline  
post #7 of 15 (permalink) Old 06-02-2010, 05:23 PM
CodeRed's Avatar
Join Date: Jun 2009
Location: USofA
Posts: 2,113
Thanks for this! I've always wondered, and this is definitely a very good example. Very clean (: I'll favorite this for future use, if ever needed.

Picasso- PK

CodeRed is offline  
post #8 of 15 (permalink) Old 06-02-2010, 06:11 PM
truthequalslies's Avatar
Join Date: Jan 2010
Location: california
Posts: 334
Really? That's what myclubleader said when he showed us how he said that's also why you tie a knot in the bag insted of useing a. Rubber band

just keep swimming just keep swimming =^-^= >D
clicky my eggy pleeease
truthequalslies is offline  
post #9 of 15 (permalink) Old 06-03-2010, 11:21 AM
xswornxoffxjello's Avatar
Join Date: Mar 2010
Location: Idaho
Posts: 485
Thanks for the info!

Addicted for life
xswornxoffxjello is offline  
post #10 of 15 (permalink) Old 04-30-2011, 08:29 PM
MrVampire181's Avatar
Join Date: May 2009
Location: Colorado
Posts: 7,193
My shipping method:

Ok so I use pretty much the same method as above but with some differences.

1. I line my boxes with reflective foil insulation.

2. If it's winter I add in a heat pack...either a 40 hour or a 72 hour.

3. I cover the heat pack with 2-3 sheets of newspaper.

4. Using ONLY black trashbags (to absorb heat from the heat pack) I make a liner. This is VERY don't want your shipping company getting PO'd over a leaky box and you DONT want your heat pack to get wet...just incase you have leaking bag or the bag pops.

5. Next I add shredded paper to the liner. This is to be used as padding and incase the bag pops the paper will soak up water and help keep the betta alive (since bettas only need to be wet to stay alive).

6. Next I bag the fish. Since I use long bags (4" by 18") I always tripple knot them. The fish is shipped with a 1/3 to 1/2 water air ratio (always less water). Also I always double bag my bettas. Thanks to my super red HMPK male Fireball for being my model :)

7. The fish is placed inside the box. Horizontally...that way it's a little easier for them to get air.

8. Extra padding is added.

9. The liner is folded in and the insulation tucked into the sides of the box.

Who am I? Well I am a Junior Member of the International Betta Congress and a breeder of white HMPKs, red dragon HMPKs, black/red dragon HMPKs, metallic multi HMPKs, blue masked HMPKs, and now multi color HMs. Soon to add black HMs. I will be showing in New Breeder class in fall of 2012.
MrVampire181 is offline  

Quick Reply

Register Now

In order to be able to post messages on the Betta Fish and Betta Fish Care forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Powered by vBadvanced CMPS v3.2.3
For the best viewing experience please update your browser to Google Chrome