Betta Fish Forum banner

Fish jumping craft mesh divider solution

688 views 1 reply 2 participants last post by  Bettanewbie60 
#1 ·
OK. So I came up with a solution to those of you having issues with fish jumping those craft mesh dividers. I cut a 3" wide strip of the craft mesh and laid it across the top of the divider so that it rests on the front and rear lip of the tank AND rests along the top of the divider. I will try and get pics.
 
#2 ·
OK. So I came up with a solution to those of you having issues with fish jumping those craft mesh dividers. I cut a 3" wide strip of the craft mesh and laid it across the top of the divider so that it rests on the front and rear lip of the tank AND rests along the top of the divider. I will try and get pics.
Yup..I had to do the same thing in one of my tanks..it works great! Glad you are posting it!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top