So I learned this from a video on youtube but I am now unable to watch it, and some of you may also be unable to watch it ,so here is 'how to' with pictures.
So here is what you will need
1: Plastic mesh
3.bread twisties or fishing line
4. a suction cup
#1 you need to cut it to the preferred size and then bend it as shown
#2 if you use the twisty you will need to twist the 2 corners together, if you use fishing line, tie them, a knot on each corner.
#3 make sure all the sharp edges are removed, i cut them off...
#4 it should look like this now... no sharp edges and the corners are connected
#5 cut out a hole for the non-suction cuppy side of the suction cup, make it a bit small so its snug!
#6 insert the suctions cup, and now you have a fish hammock
if you would like to (if you find the video on youtube it may help better idk) but you can tie a piece of plant to the top of the front side and then your fish can hide in there... my fish like to hide in it lol.