Craft: DIY Leaf Hammock
By: Teeneythebetta
http://i1254.photobucket.com/albums/hh602/alexusk97/bfwpb.png
Your betta is busy all day, swimming around, begging for food and just being down right cute, right? That is some tough work, and its only fair for them to have a cozy hammock to rest on! If you agree, follow this tutorial below courteous of MollyJean.
What you'll need:
-Folding cutting board (these ones are from Big Lots)
-Suction cups
-Aquarium Safe silicone
Directions:
1. Cut a leaf shape using the folding cutting board. Make sure the tip is rounded off and there are no jagged edges to prevent injury.
2. Scour the center of the leaf to fold it up and put a few cuts in the "stem" and fold it at the tips so that the silicone will hold better.
3. Fill the back of the suction cup with the aquarium safe silicone and press the "stem" in.
4. Let sit for 48 hours before adding to your tank.
By: Teeneythebetta
http://i1254.photobucket.com/albums/hh602/alexusk97/bfwpb.png
Your betta is busy all day, swimming around, begging for food and just being down right cute, right? That is some tough work, and its only fair for them to have a cozy hammock to rest on! If you agree, follow this tutorial below courteous of MollyJean.
What you'll need:
-Folding cutting board (these ones are from Big Lots)
-Suction cups
-Aquarium Safe silicone
Directions:
1. Cut a leaf shape using the folding cutting board. Make sure the tip is rounded off and there are no jagged edges to prevent injury.
2. Scour the center of the leaf to fold it up and put a few cuts in the "stem" and fold it at the tips so that the silicone will hold better.
3. Fill the back of the suction cup with the aquarium safe silicone and press the "stem" in.
4. Let sit for 48 hours before adding to your tank.
